2500L Fermenter

Quantity:2pc

General description: 

• Material: AISI 304

• Tank working pressure: 2bar, testing pressure: 3bar

• Jacket working pressure: 1bar, testing pressure: 2bar

• Inner tank thickness: 3.5mm, outer cladding: 2mm     

• Polyurethane insulation, thickness: 80mm, side and bottom insulated  

• Dimple plate cooling jacket  

• Cooling stage: cylinder and cone, both jackets connected  

• One temp control stage, PT100 Temp sensor

• Exterior: stain removed, and brightened on regular margin

• Interior surface: Polished, and welding joint acid cleaned                 

• Roughness: 0.4um  

• Domed top, 60 degree cone angle

• 4 pcs stainless steel leg, with adjustable leg bolt

• Top fittings: CIP arm, spray ball, PVRV

• Side fittings: Glycol inlet/outlet, thermo well, sample port, side manway

• Bottom fittings: Drain outlet, beer outlet  

• CIP arm including diaphragm pressure gauge    

• Mechanical pressure valve mounted with CIP arm   

• Dry hopping port on top .  

• Racking arm    

• Optional carbonation unit with tanks